Product Description
| i520 Scanning Modes | 
Stud Scan mode for finding studs in drywall. | 
DeepScan mode for finding studs and joists in thicker walls, floors, and ceilings. | 
Metal Scan mode for finding pipes or other metal. Metal Scan mode can also help find studs in lath and plaster walls. |
Electrical Scan mode for locating live, unshielded AC wires. | |
Watch the i520 in action.
See how all the features of an i520 are used.
| | |  |
Zircon's Top-of-the-Line Multifunction Scanner for Finding Studs, Metal, and Electrical Our Best Scanner
The MultiScanner i520 is the most advanced wall scanner that Zircon makes. It has 4 scanning modes: - STUD SCAN mode locates the edges and center of wood or metal studs in normal walls up to 3/4 inch (19 mm) deep
- DEEPSCAN mode doubles the scanning depth for walls up to 1 1/2 inches (38 mm) deep, and enables scanning for joists in some ceilings and floors
- METAL SCAN mode detects non-ferrous metal, such as copper pipes, up to 1 1/2 inches (38 mm) deep, and ferrous metal, such as rebar, up to 3 inches (76 mm) deep
- AC SCAN mode finds and traces live, unshielded electrical wiring up to two inches deep
In addition to the scanning modes, the i520 is packed with other original and patented features:
- WireWarning detection indicates the presence of live, unshielded electrical wire up to 2 inches (51 mm) deep in stud and metal scanning modes. Most wires in homes are run along wall studs, causing potential safety hazards.
- ACT (Auto Correcting Technology) automatically corrects common user errors, such as when scanning begins over a stud. The tool constantly scans its surroundings and recalibr[6423] xxx
Patent pending CenterVision technology finds the stud center in 1 step. Finds the center and edges of studs and joists, finds copper pipes (and other nonferrous metal) up to 1 1 2" (38mm) deep, finds rebar (ferrous metal) in concrete up to 3" (76mm) deep, Shipping Weight: 1.9 pounds
Shipping Dimensions: 14 x 3.6 x 10 inches
|
(
) 
